Configure a SNOM SIP "real" phone

When a SNOM (or other SIP) phone boots, it displays its own IP address. Use a web browser and configure a SIP account ("Identity" in SNOM parlance)

Then press "Apply", on the bottom.

Now, go to the "RTP" tab, and switch off RTP encryption (we'll look into encryption later in the book). Press "Apply".

If all has worked well, the SNOM phone is now registered to the FreeSWITCH server. Don't forget to "Save" permanently the whole SNOM configuration when asked, or you'll have to begin again next time the phone boots.